Hylora Early access

Design the inside of the part.

Hylora is engineering software for additive manufacturing. It checks your STL, runs a baseline structural analysis and compares lattice architectures, so the structure inside a part is chosen for a reason and not left to a default infill.

00448812121616
Gyroid, 4 mm cell, layer at z = 1.00 mm Drawn live in your browser from the gyroid equation, one layer at a time.

From an STL to a design you can explain

Each step keeps its inputs and assumptions on the record, so a result can be traced back to the file and the numbers that produced it.

  1. Inspect the file

    Hylora audits the STL for topology, triangle orientation and dimensions, and records its SHA-256 so later results stay tied to that exact file. It reports problems instead of repairing the mesh silently.

  2. State the loads

    You pick the faces that are held and the faces that carry force, and enter the material as elastic modulus and Poisson ratio. Units are millimetres throughout.

  3. Solve a baseline

    A linear-static tetrahedral finite-element analysis of the solid part gives the reference displacement and stress that every lattice option is compared against.

  4. Compare architectures

    Gyroid, Diamond and Schwarz P candidates are screened using recorded effective properties, then the part is analysed again with each one. You see the lightest, the stiffest and a balanced choice, with the criterion shown.

  5. Generate and export

    Hylora builds the shell-and-lattice geometry as a downloadable STL and writes a versioned report with file hashes, inputs and stated limits.

Three lattice families, one comparison

All three are triply periodic minimal surfaces: smooth, self-supporting shapes that repeat in every direction. Each drawing is one layer of a 16 mm square with a 4 mm cell.

Gyroid

No straight channels and no flat planes, which is why it is the common starting point for printed lattices.

Diamond

Follows the bond pattern of the diamond crystal, with more surface area in each cell than a gyroid.

Schwarz P

The simplest of the three: chambers joined by necks along the three axes.

Hylora turns each periodic cell into equivalent material properties by finite-element homogenization, so a lattice can be analysed at the scale of the whole part.

Who it is for

Engineering and R&D teams

Use explicit loads, a baseline analysis and side-by-side architecture comparisons to choose a lattice, with a report you can hand to a colleague.

Print shops and maker labs

Check STL files before they reach the printer, one at a time or as an offline batch of up to 100, and keep a record of what was checked and what failed.

Researchers and partners

Build on reproducible numerics: convergence studies, independent solver checks and a printable 16 mm solid and gyroid coupon kit for your own tests.

What Hylora does

One workflow from the file you already have to a lattice design with the numbers behind it.

STL inspection

Topology, orientation and dimension checks with SHA-256 file identity, for a single part or an offline batch of up to 100 files.

Structural analysis

Linear-static tetrahedral finite-element analysis with the supports, forces and material you specify.

Lattice comparison

Gyroid, Diamond and Schwarz P candidates analysed on the same part and ranked as lightest, stiffest and balanced.

Geometry generation

Shell-and-lattice geometry built from your part and delivered as a downloadable STL.

Result fields

Displacement and von Mises stress contours on the analysis mesh, with export for ParaView.

Traceable reports

Versioned engineering reports and saved projects that tie every result to its source file and inputs.

Request early access

Hylora is opening to its first users. Leave your email and a line about what you make, and we will write to you when a place opens.

We use your details only to reply about Hylora. Read the privacy notice.